Products

Pack of 2 high-quality, robust replacement hook pads for detail sanders and palm sanders. Our hook pads have been manufactured using high-performance nylon hook material backed with a 3mm foam layer and a very strong self-adhesive feature. When your original hook pad becomes worn and will no longer effectively hold sanding pads, simply remove it using a paint scrapper, being careful not to damage the base of the machine. Ensure that as much of the old foam backing as possible is removed from the base of the device. Use the old pad as a template to draw any holes or other features onto the new hook pad using a pencil. Cut out the holes and other features using a sharp Stanley knife or similar cutting device. The outside profile of the pad can be cut to size using sharp scissors.

Our hook pads will fit most makes of detail sanders. The Velcro like nylon hooks will grip all hook and loop sanding discs very efficiently.

The Loxley A3 cutting mat is made from 3mm self-healing rubber to allow repeated cutting of paper, card, fabric with craft knives or scalpels to protect surfaces and stop blades from breaking or becoming blunt too quickly. The cutting is printed on both sides with a grid in both Inch and Center-meters Measurements.

- Self Healing 

- Increases Blade Life 

- Double Sided Alignment Grid (cm+ Inch)

A very high-performance masking material which is easy to cut, apply and reposition. Readily adheres to most surfaces and, unlike other masking materials, paint will not normally bleed under the edge once properly secured in place. Each Pack contains 3 sheets (each approx. A4 sized) of masking material which is perfect for creating intricate masks using the Gyro-Cut® JUNIOR or PRO tools. Also available to purchase by the meter. Please send specific enquiries to sales@craftyproducts.co.uk for a quotation.

Save money with this really useful Combo set! Here we have combined our Sticky Mat Adhesive and Mat Magic cutting mat cleaner providing you with everything you need to fully refurbish your cutting mat. Perfect for all self-healing mats, Cricut, ScanNCut and Silhouette machine mats.

Our Sticky Mat Adhesive is a specially formulated low-tack glue that is designed to remain tacky when dry. This acts like an extra pair of hands to temporarily hold your work in place during the cutting process. The adhesive will not transfer to your artwork and it allows for easy repositioning over and over again. Great for scrapbooking, planner sticker work, decoupage, applique, mounting photographs in albums and many other types of crafting and hobby projects.

Important note: This product must be stored at above 5 degrees Centigrade. If the adhesive freezes it will solidify and become unusable. When warmed up it will NOT return to liquid. Please do not order this product if the average temperature in your area is likely to drop below 5 degrees Centigrade.

Once you have completed your project, you can easily clean away any debris, dust or dirt from the cutting mat surface using our handy Mat Magic cleaner. This is particulary useful for refurbishing heavily soiled cutting mats prior to applying Sticky Mat Adhesive. 

Our Combo set is a convenient and cost-effective way of buying both items together.

Our Gyro-Cut® PRO cutting tool is a "must have" for any craft or hobby enthusiast. Our newly developed range of performance blades will revolutionise the way you work on craft or hobby projects. The easy-to-use, hand-held tool features a 360° rotating blade, which works like a pen and cuts like a knife. Cutting complex curves and intricate shapes has never been so easy!

The Deep Cut blade is perfect for cutting:

• Thick Fabric
• Felt up to 3mm
• Sugarpaste
• Medium Balsawood
• Thin Leather (3mm)
• Thicker Card
• Cereal Cartons
• Polymer Clay
• Thin Foam/Depron

This add-on blade is only compatible with our Gyro-Cut® PRO and Fabri-Cut® tools. Please note that this blade will NOT fit the blue Gyro-Cut JUNIOR tool.

See our "How To" video showing the correct way to replace the blade.

Caution: This blade has a very sharp cutting edge and point and is not suitable for children under the age of 10 years without adult supervision.

A range of precision laser-cut circular templates produced from top quality birch plywood. The templates are ideal for use with our Gyro-Cut® JUNIOR and Gyro-Cut® PRO tools for quickly and easily cutting perfect circles. The kit contains 9 discs ranging from 1” to 8” internal diameter. Circles of 9” diameter can be cut using the outside diameter of the largest disc.

A range of precision laser-cut hexagonal templates produced from top quality birch plywood. The templates are ideal for use with our Gyro-Cut® JUNIOR and Gyro-Cut® PRO tools for quickly and easily cutting perfect hexagons.

A range of precision laser-cut square templates produced from top quality birch plywood. The templates are ideal for use with our Gyro-Cut® JUNIOR and Gyro-Cut® PRO tools for quickly and easily cutting perfect squares.

"Eye On It" anti-spiking drink cover for your glass. This hair or wrist scrunchie doubles as a very effective stretchable cover for your drink glass to prevent dangerous and unwanted items such as pills and powders being dropped into your drink whilst you might be distracted. The idea and design of our product was unfortunately born out of several friends having their drinks spiked at night clubs. We looked at the options available and found that none of the anti-spiking covers on offer were suitable for a wide enough range of drinking glasses. Most were only suitable for a very narrow band of glass types such as a pint glass, a wine glass and a whisky glass. Our "Eye On It" drink covers come in two sizes, STANDARD for wine, pint, whisky glasses and tumblers and XL for larger gin and cocktail glasses which are now very popular. Our unique selling point is the red band of silicone which we have bonded to the elastic around the inside of each cover. This prevents the cover from slipping off the glass and holds it firmly in place. The cover has a small hole to accept the straw of your choice. Whilst our covers do not come with a straw they out perform other more expensive products and represent great value for money. Wear it on your wrist or in your hair so it's always available when you most need it. Our products are fully machine washable and reusable, providing many years of protection. Allow product to air dry and do not tumble dry.

Warning: Whilst our anti-spiking drink covers are an easy and convenient way of preventing
your drink from being spiked or tampered with, they cannot guarantee your safety. Always keep your drink in sight, buy your own drink and never leave a drink unattended.

Our specially formulated heat-activated powder adhesive is perfect for quickly and easily bonding fabric to fabric or for bonding paper and other materials to the back of fabric to stabilise them prior to cutting. For best results always cover the surface of your ironing board with a layer of brown paper or similar to prevent making your normal cover sticky. We also recommend fitting our Iron Soleplate TEFLON® Cover GC-1418 to your iron to protect it. Now place the fabric face down on top of the brown paper. Sprinkle a small amount of Fab-Grip® over the fabric in an even layer. Now place paper over the fabric and activate the adhesive using a hot iron. Once the fabric has cooled down, the paper will be temporarily bonded to the rear of the fabric. This will stabilise the fabric and stop it from rucking up or moving when cutting with our Gyro-Cut® PRO tool. Once the desired shape has been cut, the paper can be peeled off the fabric.

Clean, neat, invisible and wash-proof, Fab-Grip® is supplied in a handy 50g dispensing bottle which has a dual action lid. Simply select the type of opening required for your application and apply the adhesive by lightly shaking the bottle over the fabric at a height of around 6 inches. Always test on a piece of scrap fabric prior to use. Follow safety instructions printed on the label.

Store in a cool, dry place and keep away from children.

Now supplied in a reusable PVC zipper bag for convenient storage.

The Gyro-Cut® JUNIOR starter kit includes everything you will need to explore paper crafting in a totally new way (does not include a cutting mat). The kit contains a Gyro-Cut® JUNIOR tool fitted with a"skin-friendly" paper/card blade, Replacement Blade Pack containing a spare blade and protective cover and a 50ml bottle of Sticky Mat® Adhesive. The amazing Gyro-Cut® JUNIOR craft and hobby tool is designed to easily cut thin sheet materials such as paper, thin card, masking tape, vinyl, tissue paper and foil. It is also perfect for cutting materials used in the hobby world, such as Oracover®, Oratex®, Orastick®, Solarfilm®, Solartrim® and Solartex®. This hand-held tool has a 360-degree rotating blade which enables you to cut very complex shapes easily and quickly. Unlike other craft knives, the Gyro-Cut® JUNIOR blade will not readily cut human skin in normal use. Specifically designed for right and left handed use.

Applications include paper cutting, decoupage, stencil making, planner stickers, artwork, graphic design, architecture, scrapbooking, signwriting using vinyl and many other uses. Gyro-Cut® JUNIOR also has many applications in the world of model making. It will enable you to cut complex shapes out of vinyl covering materials to create your own decals and roundels.

Not recommended for children under the age of 10, unless under adult supervision.

Gyro-Cut, works like a pen.........cuts like a knife!

Now supplied in reusable PVC zipper bag for convenient storage.

The amazing Gyro-Cut® JUNIOR craft and hobby tool is designed to easily cut thin sheet materials such as paper, thin card, masking tape, vinyl, thin Mylar/acetate, photographs, tissue paper and foil. It is also perfect for cutting materials used in the hobby world, such as Oracover®, Oratex®, Orastick®, Solarfilm®, Solartrim® and Solartex®. This hand-held tool has a 360-degree rotating blade which enables you to cut very complex shapes easily and quickly. Unlike other craft knives, the Gyro-Cut® JUNIOR blade is "skin-friendly" and will not readily cut human skin in normal use and it is therefore very suitable for use in schools for younger craft and hobby enthusiasts. Adult supervision is recommended for those under the age of 10 years. Specifically designed for right and left handed use.

Applications include paper-cutting, decoupage, stencil-making, planner stickers, artwork, graphic design, architecture, scrapbooking, signwriting using vinyl, and many other uses. Gyro-Cut® JUNIOR also has many applications in the world of model making. It will enable you to cut complex shapes out of vinyl covering materials to create your own decals and roundels.

Gyro-Cut, works like a pen.........cuts like a knife!

The Gyro-Cut® PRO Starter Kit for fabric includes everything you will need to explore fabric cutting in a totally new and exciting way (does not include a cutting mat). The kit contains a Gyro-Cut® PRO tool, Tungsten Carbide Fabric Blade Pack, 50ml bottle of Sticky Mat® Adhesive and a 90g bottle of Fab-Grip® Powder Adhesive. The supplied blade is suitable for cutting thin fabrics such as cotton and polyester. We offer a range of add-on blades suitable for cutting materials such as felt (requires the Easy Felt™ attachment), leather, sugarpaste, foam sheet/Depron, polymer clay, balsawood, etc.

Not recommended for children under the age of 10, unless under adult supervision.

The Gyro-Cut® PRO Starter Kit for paper includes everything you will need to explore paper cutting in a totally new and exciting way (does not include a cutting mat). The kit contains a Gyro-Cut® PRO tool, Standard Cut Hardened Steel Blade Pack and a 50ml bottle of Sticky Mat® Adhesive. The supplied blade is suitable for cutting all types of paper, thin card, vinyl, Mylar/acetate, photographs, model covering films, masking material, Tamiya tape and many other thin materials. We offer a range of add-on blades suitable for cutting materials such as fabric, felt, leather, sugarpaste, foam sheet/Depron, polymer clay, balsawood, etc.

Not recommended for children under the age of 10, unless under adult supervision.

Requires selection of a blade to complete.

The amazing Gyro-Cut® PRO craft and hobby tool is designed to easily cut a much wider variety of materials. This device can be fitted with different blades to suit various applications. The Standard Cut hardened steel blade will cut all of the same materials as the Gyro-Cut® JUNIOR tool. The Medium Cut tungsten carbide 30-degree blade will cut thin fabrics, thin felt (using the Easy Felt™ attachment), medium Mylar®/acetate, thin leather (2mm max), thin balsawood (2mm max), medium card, vehicle wrapping and signwriting vinyl. The Deep Cut tungsten carbide 45-degree blade will cope with materials such as thicker fabrics, thicker felt (3mm max), sugarpaste, medium balsawood (3mm max), thin leather (3mm max), thicker cardstock, cereal cartons, polymer clay, thin foam/depron, etc. The PRO tool and your selection of blade(s) will be supplied in a reusable PVC zipper bag with a separate compartment for storing your blades (blades are sold separately).

The tungsten carbide blades have sharp cutting edges and points and are not recommended for children under the age of 10 years.

Gyro-Cut, works like a pen.........cuts like a knife!

The exciting new Hiesbok EASY2 electric-powered model aircraft kit is designed for 2 or 3 channel radio control and the detailed plan sheet provides full installation information. Please note that the electric motor and radio control equipment are NOT included. The fuselage is fun and easy to build thanks to the precision laser-cut, slot together components. The wings are also very straightforward and the whole building process can be completed in a matter of a few days. The kit includes pushrods for the elevator and rudder as well as the control horns. All parts are clearly laser marked with part numbers and the smaller items are sealed in plastic bags which have labels attached showing each part and quantity. These labels are also shown on the detailed plan sheet for easy cross referencing and part identification. The EASY2 is a very stable beginners aircraft and is suitable for anyone taking their first step into radio controlled aircraft. The plans provide details for adapting the model by fitting ailerons for the ultimate in aerobatic control.

Wingspan: 840mm Length: 720mm Weight: 250g

The following items will be required to complete the model and are NOT supplied with this kit:
Electric motor and propeller.
Radio control equipment (servos, battery, transmitter, receiver).
Adhesive: Thin CA (CyanoAcrylate) and two part epoxy recommended.
Flat wooden building board, hobby knife, pins, small clamps or clothes pegs, 4.2mm drill bit, greaseproof paper (to cover plan sheet), sandpaper, paint or varnish.

Please note that the EASY2 model aircraft is not a toy and must be operated with extreme caution. We recommend joining the British Model Flying Association (BMFA) in the UK or the equivalent association within your country. Please follow all safety instructions provided with electric motor and radio control equipment. Always keep hands, clothing and other items well clear of a rotating propeller as it is capable of causing serious injury even at low RPM.

Detailed instructions in English included plus access to a full range of photos online showing each stage of construction.

The new Mini DINO glider is quick and easy to build and the finished model exhibits excellent flight characteristics for its size. This is a very complete kit which includes precision laser-cut plywood and balsawood parts which are marked with part numbers to aid assembly. The elevator, rudder and associated trim tabs are fitted using the supplied wire hinges, enabling adjustment prior to each flight. This excellent feature is very useful for teaching inexperienced modellers the fundamentals of aerodynamics and the effect of control surface deflection to flight patterns. The kit comes with a detailed coloured plan sheet which has each part number clearly marked and cross-referenced to the contents. The Mini DINO is suitable for hand-launching as a chuck glider or it can be launched using a bungee (not supplied). Ballast weights are provided for adjustment of the centre of gravity.

Detailed instructions for building and finishing the model can be downloaded from this website. View here

Wingspan: 780mm   Length: 596mm   Weight: 75g       Designed by Hiesbok S.R.O.

The Hiesbok HPH 304 SHARK model sailplane kit represents excellent value for money and is a pleasure to build and fly. Once the model has been correctly balanced, using the supplied ballast pellets, flight performance is outstanding! The model can be used as a chuck glider or launched using the included rubber catapult.

All parts have been precision laser-cut from high-quality balsawood. The model is quick and easy to build and will provide you with many hours of fun flying. The kit comes complete with sandpaper to enable you to shape each feature of the airframe prior to final assembly. A wide variety of adhesives can be used to bond the various elements together, but we recommend using UHU Hart when bonding the wings due to its forgiving nature and flexibility. This will help you to achieve the correct dihedral (angle between the wings) with relative ease, using the included plywood stand/dihedral jig.

The kit includes everything you will need to complete the sailplane except glue.

Specification: Wingspan 370mm, Length 210mm, Weight 5g (approx.)

Includes detailed step by step instructions in English. View here

The Hiesbok HPH TWIN SHARK model sailplane kit is a larger version of our very popular HPH Shark kit. This larger scale sailplane is a pleasure to build and fly. Once the model has been correctly balanced, using the supplied ballast pellets, flight performance is outstanding!

All parts have been precision laser-cut from high-quality balsa and birch ply. The model is quick and easy to build and will provide you with many hours of fun flying. The kit comes complete with sanding blocks and sandpaper to enable you to shape each feature of the airframe prior to final assembly. A wide variety of adhesives can be used to bond the various elements together, but we recommend using UHU Hart when bonding the wings due to its forgiving nature and flexibility. This will help you to achieve the correct dihedral (angle between the wings) with relative ease, using the included plywood stand/dihedral jig.

The kit includes everything you will need to complete the sailplane except glue.

Includes detailed plans and instructions in English. View here

This handy cover fits most steam iron soleplates and provides exceptional protection when using our Fab-Grip® heat-activated powder adhesive. The cover will also dramatically improve the performance of damaged or worn irons, allowing easy, snag-free ironing of delicate items.

Our Magic Mat mat cleaner is a specially formulated blend, designed to clean and renovate your cutting mat. The expert cutting mat cleaner removes debris, dust and dirt from the mat surface leaving it clean and ready for use.

If you make a real mess whilst tackling a new crafts project, then this is for you! With our Magic Mat mat cleaner, your cutting mat will be left looking as good as new, ensuring top cutting results every time. This is really useful for increasing the performance of your cutting mat and maintaining its quality.

An essential crafting accessory for your arts and crafts toolkit, the Magic Mat cutting mat cleaner can be bought direct from the Crafty Products website or via our Amazon site! If you love great value, then you’ll be glad to know that our specialist crafts mat cleaner can be bought together with our Sticky Mat Adhesive product as a Combo set.

Get in touch or sign up to our newsletter for offers on our crafts accessories.

The Medium Cut tungsten carbide blade is designed to fit our Gyro-Cut® PRO tool. The cutting edge of this blade has been precision diamond ground to achieve a finish capable of cutting many types of fabrics with the greatest of ease.

Ideal for cutting thin fabrics, felt, Mylar/acetate, thin leather, thin balsawood, medium thickness of card, vehicle wrapping vinyls, signwriting vinyls and many other thin to medium materials.

This blade is very sharp and is not suitable for use by children unless under adult supervision.

The Medium Cut, tungsten carbide blade is perfect for cutting:

• Thin and medium fabrics
• Thin felt
• Medium Mylar/acetate
• Thin leather (2mm max.)
• Thin balsawood
• Medium card
• Vehicle wrapping vinyls
• Signwriting vinyls

The Medium Cut blade is only compatible with our Gyro-Cut® PRO and Fabri-Cut® tools. This blade does NOT fit the blue Gyro-Cut® or Gyro-Cut® Junior tools.

See our "How To" video showing the correct way to replace the blade.

Caution: This blade has a very sharp cutting edge and point and is not suitable for children under the age of 10 years without adult supervision.

The new GINO model glider kit can be built as an excellent free-flight glider or, if desired, fitted with miniature radio control equipment for 2 channel control (elevator and rudder). Please note that whilst the radio control installation is shown on the detailed plan, no radio control equipment is supplied with this kit. However, the 2 Bowden cables and control horns are provided. The GINO glider has a built-up wing, carbon fuselage rod and adjustable flight control surfaces. This is a very complete kit which includes precision laser-cut plywood and balsawood parts which are marked with part numbers to aid assembly. The elevator, rudder and associated trim tabs are fitted using the supplied wire hinges, enabling adjustment prior to each flight. This excellent feature is very useful for teaching inexperienced modellers the fundamentals of aerodynamics and the effect of control surface deflection to flight patterns. Alternatively, the control surfaces can be fitted using the included nylon material to provide the correct amount of deflection for fitting radio control. The kit comes with a detailed coloured plan sheet which has each part number clearly marked and cross-referenced to the contents. The GINO is suitable for hand-launching as a chuck glider or it can be launched using a bungee (not supplied). Ballast weights are provided for adjustment of the centre of gravity. The kit even contains the tissue paper required to cover the built-up wings and coloured decals to finish the model.

Detailed instructions, in English, for building and finishing the model can be downloaded here 

To view detailed photos of each building step please visit https://hiesbok.rajce.idnes.cz/gino_RC/

Wingspan: 900mm   Length: 680mm   Weight: Min. 150g     

Designed and produced by Hiesbok S.R.O., Czech Republic

Additional items required to complete the GINO model glider but not included with the kit:

• A good quality, fast curing wood adhesive. We recommend Deluxe Materials Super ‘Phatic glue as it is easy to use and allows rapid bonding of balsa and ply parts. It is superior to PVA glue as it is much easier to sand once cured. Visit www.deluxematerials.co.uk for details.
• Alternatively, a good quality, thin CA (CyanoAcrylate) which will wick (flow) into joints.
• Two-part 30-minute epoxy adhesive.
• Modelling pins for temporarily holding assembled items whilst glue sets.
• Fine sandpaper or emery paper for shaping the model where indicated.
• Materials for finishing the model such as tissue paste/UHU glue stick, dope and paint.
• Flat building board to protect the surface below from glue, etc.
• Grease-proof paper or cling film to protect the plans whilst gluing.
• Clothes pegs or small clamps.
• Hobby knife.
• 3mm drill bit

Do you work for a school or nursery that is desperate to encourage children to become interested in shapes and geometry, without boring them with a textbook?

The Polydron educational construction toys are a breath of fresh air in the classroom, allowing children to run free with their creativity! Whilst the Polydron sets provide endless hours of fun and construction for the kids, they also help encourage independent thinking whilst allowing them to better understand 2D and 3D shapes. The Polydron pieces are designed to connect with one another, so that they can be built into a whole range of crazy creations.

Our Polydron Mega Set contains 126 pieces as follows: 10 squares, 60 equilateral triangles, 12 right-angle triangles, 24 Frameworks equilateral triangles, 12 Frameworks squares, 6 Frameworks isosceles triangles and 2 swivel joints (rotating pieces which add movement to your models). The Polydron set comes in a handy plastic tub for easy storage between building sessions, meaning no mess!

The Mega Box intermediate Polydron set has enough pieces to allow you to build a very wide variety of models including basic to advanced mathematical models, robots, rockets, bridges, windmills and many others. If you are struggling for Polydron design ideas, then worry no more as this tub includes a detailed user guide and examples of models to build.

Built to last a lifetime, the Polydron toys are ideal for classrooms and educational institutes where they can be used over and over again without needing to be replaced. This is why Polydron construction sets provide incredible value and have been used by schools for over a decade! Even better value is given on our discount educational toys when bought in bulk quantities, as Crafty Products offer high volume discounts.

POLYDRON® will stimulate and challenge the imagination of the whole family!

Are you struggling to teach your children about shapes and geometry without them becoming uninterested?

With the Polydron educational construction toys, you will never need to worry again. The Polydron toys are designed to offer children a fun, building experience whilst allowing them to understand 2D shapes and how they connect to create 3D shapes. Perfect for encouraging independent thinking, the Polydron sets are great for schools and nurseries.

The Midi Polydron Tub is the smallest in our range, ideal for teaching at home or as a learning tool disguised as a fun birthday present! This Polydron starter kit contains 70 pieces as follows: 5 solid squares, 20 solid equilateral triangles, 12 Frameworks right-angle triangles, 24 Frameworks equilateral triangles, 13 Frameworks squares, 6 Frameworks isosceles triangles and a colourful wall poster. Designed with interlocking hinges, the shapes connect to offer the user endless hours of construction and excitement.

You need not worry about mess, as the Polydron set comes in a handy plastic tub for easy storage between building sessions. The Midi Polydron Tub set has enough pieces to allow you to build a wide variety of small mathematical models and solid shapes. And, if you’re struggling for Polydron design ideas, the set includes a detailed user guide and examples of models to build.

Get in touch with Crafty Products to hear about our bulk purchase offers on our discount educational toys.

Aimed at boys and girls of all ages, Polydron is not only great fun to use, it is also perfect for educational institutes such as schools, nurseries, playgroups and youth centres. The Polydron educational construction toy is built to last and can be used over and over again. 

So, what is Polydron?

Polydron is a fun educational construction toy, designed to help children to use logical thinking, construct 2D and 3D shapes and learn about geometry. In the Polydron sets, there are a variety of triangle shapes, pentagon shapes and square shapes, all with interlocking joints. These allow children to make different constructions and really let their imagination run wild whilst learning at the same time.

The Polydron Mighty Box set is the biggest Polydron set in our range, containing 223 pieces as follows: complete set of 4 wheels, axles & fittings, 20 solid squares, 80 solid equilateral triangles, 24 Frameworks right-angle triangles, 48 Frameworks equilateral triangles, 24 Frameworks squares, 12 Frameworks isosceles triangles and 3 swivel joints (rotating pieces which add movement to your models).

With hundreds of Polydron pieces to play with, you have endless construction possibilities! From basic to advanced mathematical models, to robots, rockets, bridges, windmills, cars, trains, lorries and many other exciting shapes. But, if you are still struggling for Polydron construction ideas, then do not worry as our sets come with a detailed user guide and model examples.

Supplied in a recyclable, reusable cardboard box for convenient storage after use.

POLYDRON® will stimulate and challenge the imagination of the whole family!